• The Power Pack is used to test large and high voltage rotating machines such as slow speed 4,160V, to 13,800V electric motors
• All tests available with the iTIG are standard in all Power Packs when used together with an iTIG.
• Power Packs may be used for Stand Alone DC Hi-Pot and Megohm Testing.
• The surge test is a load dependant test. Load characteristics are influenced by operating voltage, horse power, rotating speed, frame size, coil type etc. Greater loads may necessitate a Power Pack.
• Assembled motors may limit output voltage because of the magnetic influence of the rotor thus requiring a Power Pack.
• The iTIG captures and displays the surge waveforms from the Power Pack.
• The Power Pack is portable and has the same rugged case as the iTIG.
• Simple interface with the iTIG, for ease of use!

Standard 30KV Power Pack (iTIG) Specifications:

Surge Test

• Maximum Voltage 30 kV
• Maximum Current 2,000 Amps
• Maximum Energy 18 Joules

DC Hi-Pot / Megohm Tests

• Maximum Voltage 30 kV
• Maximum Current 5 mA
• Over-Current Trip 5mA
• Micro-Amp Display 1 micro Amp resolution
• Meg Ohm Display 1 Meg Ohm to infinite

Input Voltage: 120 VAC or 220-240 VAC, 50 or 60Hz
Weight: 70 lbs - 32kg
Dimensions: 20¼ x 8½ x 19½ inches - 51 x 22 x 50 cm

Power Packs with other output specifications are available on request.